Solar Fluid MPG RTU (-56 ˚C)
Solar Fluid MPG RTU (-56 ⁰C)
Solar Fluid MPG RTU (-56 ˚C) for closed circuit solar panels specially designed MPG-based heat transfer that is harmless to human health and nature is liquid. This long-life liquid, solar system heat transfer function, as well as corrosion, lime, specially formulated to protect against spoilage, bacterial growth and freezing, has been done.
Features
- Provides excellent freeze protection for system maintenance.
- Cleaner kept circuits, efficient heat transfers and long-term cost offers advantages.
- Provides superior corrosion protection as it contains highly efficient inhibitors, solar protects the system against wear.
- Solar Liquid is a red liquid with a temperature range of -56°C to 120°C.
- This heat transfer fluid is tested to ASTM D1384-05 corrosion test standard. Has been and exceeds.
- The product can be used ready-to-use for a maximum temperature of -56°C. dilution with water It is recommended to make the ratio according to the table below and the maximum dilution ratio should not exceed 50% cannot exceed.
- When there is any leakage that may occur in the system, it will harm the human body and the environment.It is harmless in case of spillage.
Technical Specifications
| Colour | Visual | Red |
| *Density, 15°C, gr/cm3 | ASTM D 4052 | 1,0508 |
|
pH, 20°C; - Diluted with 50% - Undiluted Antifreeze |
ASTM D 1287 |
8,00 8,55 |
| Freezing Point, ºC/ºF (ASTM D 1177) | Antifreeze Ratio (ml) | Water Ratio (ml) |
| -56 / -68,8 | 100 | 0 |
| -45 / -49 | 90 | 10 |
| -35 / -31 | 80 | 20 |
| -26 / -14,8 | 70 | 30 |
| -21 / -5,8 | 60 | 40 |
| -15 / 5,0 | 50 | 50 |
*Data given above are typical properties and may vary slightly.
Revision Number
16.12.2025 / REV01